護坡模具在選擇的時候最好注意以下幾點:
護坡模具在選擇的時候最好注意以下幾點:
When choosing slope protection mould, the following points should be paid attention to:
1、不要過于比較價格,買便宜的模具不如買耐用的模具,這樣可以減少產品不合格的風險。
1. Don't compare prices too much. It's better to buy cheap moulds than durable ones. This can reduce the risk of unqualified products.
2、粉碎回料做的護坡模具,表面上會有很多黑點,渾濁不光亮,加力變形大。
2. There will be many black spots on the surface of the slope protection mould made of crushing and recycling material, which is muddy and not bright, and has large afterburning deformation.
3、護坡模具的外觀要精美,護坡模具外觀上不要有太多的飛邊毛刺和刀銷的痕跡。凡是外觀粗糙的產品,質量也不好到哪去。
3. The appearance of slope protection mould should be exquisite. There should not be too many flying burrs and knife pins on the appearance of slope protection mould. The quality of products with rough appearance is not good enough.
4、在購買護坡模具時最好到專業生產護坡模具的廠家
4. When purchasing slope protection moulds, it is better to go to the manufacturer specializing in the production of slope protection moulds.