路沿石的安裝形式
1.路沿石必須掛通線進行施工,按側平面頂面示高標線繃緊,按線碼砌側平石,側平石要安正,切忌前仰后合,側面頂線順直圓滑平順,無高低錯牙現象,平面無上下錯臺、內外錯牙現象。
1. Lu Yanshi must hang line construction, according to the lateral plane top surface shows high standard line tension, according to the line side flat stone blocks, the flat side of stone to safety is, do bjwudao.89ix.cn bjyuesao.89ix.cn bjdiandongmen.89ix.cn bjzhuangxiu.89ix.cn bjbaojie.89ix.cn bjbanjia.89ix.cn not laugh, the side top line straight smooth, no level of the wrong tooth phenomenon, plane, dislocation, and wrong tooth phenomenon.
2.路沿石必須座漿砌筑,座漿必須密實,嚴禁塞縫砌筑;
The 2. road along the stone must be masonry, the seat slurry must be dense, and the slit is strictly prohibited.
3.路沿石接縫處錯位不超過1mm;側石和平石必須在中間均勻錯縫。
The dislocation of the 3. road along the seam is not more than 1mm; the side stone peace stone must be misaligned in the middle.
4.路沿石側平石應保證尺寸和光潔度滿足設計要求。外觀美觀,對彎道部分側石應按設計半徑專門加工彎道石,砌筑時保證線形流暢、圓順、拼縫緊密?;⌒蝹仁仨毴斯ぞ徍髵伖馓幚?。
4. road along the stone Ceping stone should ensure the size and finish to meet the design requirements. Beautiful appearance, should be designed according to special processing of stone on the curve bend radius part side of the stone masonry, to ensure the smooth, round, linear seam closely. The curved side stone must be polished and treated manually.
5.路沿石后背應還土夯實,夯實寬度不小于50mm,厚度不小于15mm。
The back of the 5. road along the back of the stone should be rammed and rammed, the rammed width is not less than 50mm, and the thickness is not less than 15mm.
6.路沿石勾縫:勾縫時必須再掛線,把側石縫內的雜物剔除干凈,用水潤濕,然后用1:2.5水泥砂漿灌縫填實勾干。
6. Lu Yanshi: must hang pointing pointing to the side of the line, crevice debris removed clean, water wetting, and then use the seam filled hook dry filling 1:2.5 cement mortar.
7.側平石勾縫、安砌后適當澆水養護。
7. side flat stone pointing, laid after appropriate water conservation.